全IP电视直播节目的即时回看技术

介绍了已运用于实践中的一种全IP电视直播节目即时回看技术,用户通过遥控器一键实现直播节目的即时回看,极大地提升了用户的观看体验。通过在临汾市智慧广电全IP融合业务网建设实践项目中的使用,技术的先进性和有效性得到实践验证。     

Stochastic polynomial optimization

ABSTRACT

This paper studies stochastic optimization problems with polynomials. We propose an optimization model with sample averages and perturbations. The Lasserre-type Moment-SOS relaxations are used to solve the sample average optimization. Properties of the optimization and its relaxations are studied. Numerical experiments are presented.     

Experimental study on free and submerged multi-jets

The flow characteristics of the hydraulic jump due to parallel jets are different from the classical jump emerging from a single gate. Due to the highly complex flow field at the downstream pool, deciding about the tailwater measuring location is a challenging issue affecting the flow measuring accuracy. Experiments are conducted herein, on different parallel jets’ configurations for both free and submerged flow conditions. To quantify the flow uniformity, for any downstream cross section, the associated momentum correction factors, β₂, were estimated for the free-flow condition. It is found that β₂-values depend significantly on the measuring location, and consequently the available conjugated depths relationship results in poor estimation when measuring location moves downstream. Employing Buckingham analysis, a general formula is proposed to calculate the momentum correction factors associated with the free hydraulic jump at different downstream measuring locations. The experimental results of this study indicated that such a formula enhances distinguishing between free and submerged flow conditions of the gates installed in parallel. Finally, a dimensionless stage-discharge formula is presented to predict the submerged flow rate through parallel gates of different gate openings and widths.     

核电厂应急监测计划的关键问题及探讨

应急监测计划是核电厂应急计划的重要支持性文件,是核电厂应急监测准备和响应的重要依据。本文从核电厂事故应急监测方案、监测方法、监测设施设备配置、应急监测响应、监测能力的保持、质量保证等关键问题进行分析研究,提出相关建议,为核电厂应急监测计划的制订提供参考。     

Parallel spatial-temporal convolutional neural networks for anomaly detection and location in crowded scenes

Anomaly detection and location in crowded scenes have attracted a lot of attention in computer vision research community recently due to the increased applications of intelligent surveillance improve security in public. We propose a novel parallel spatial-temporal convolution neural networks model to detect and localize the abnormal behavior in video surveillance. Our approach contains two main steps. Firstly, considering the typical position of camera and the large number of background information, we introduce a novel spatial-temporal cuboid of interest detection method with varied-size cell structure and optical flow algorithm. Then, we use the parallel 3D convolution neural networks to describe the same behavior in different temporal-lengths. That step ensures that the most of behavior information in cuboids could be captured, also insures the reduction of information unrelated to the major behavior. The evaluation results on benchmark datasets show the superiority of our method compared to the state-of-the-art methods.     

Comments on “Study and application of discharge calibration for submerged radial gates” by Guo X., Guo Y., Wang T., Fu H., Li J. Flow Meas. Instrum. 78 (2021) 101912, https://doi.org/10.1016/j.flowmeasinst.2021.101912

This paper discusses the capability of Guo et al.'s (2021) equations to determine the discharge of radial gates under submerged flow conditions. It was concluded that Guo et al.'s (2021) equations are associated with error reduction compared to the Incomplete Self-Similarity (ISS) theory and the calibration method. However, it does not have a significant advantage over Energy-Momentum (E-M) approach. Employing E-M principles, new equations were proposed to determine the discharge of radial gates, which has some advantages compared to Guo et al. (2021), such as (1) error reduction under partially and fully submerged flow conditions, (2) least dependence on the empirical constants, (3) uniformity of form over the entire submerged condition, and (4) no need to classify the submerged flow. Field calibration showed that the proposed equations in the present study for a single gate predict the discharge of parallel radial gates with a mean absolute error of less than 4.5% subject to the submerged operation of all open gates.     

Liner services network design and fleet deployment with empty container repositioning

Transportation demand of shipping container fluctuates due to the seasonality of international trade, thus, every 3–6 months, the liner company has to alter its current liner shipping service network, redeploy ships and design cargo routes with the objective of minimizing the total cost. To solve the problem, the paper presents a mixed integer linear program model. The proposed model incorporates several relevant constraints, such as weekly frequency, the transshipment of cargo between two or more service routes, and transport time. Extensive numerical experiments based on realistic date of Asia–Europe–Oceania shipping operations show that the proposed model can solve real-case problems efficiently by CPLEX. The results demonstrate that the model can reduce ship’s capacity consumption and raise ships’ capacity utilization.     

Balancing of parallel U-shaped assembly lines

A new hybrid assembly line design, called parallel U-shaped assembly line system, is introduced and characterised along with numerical examples for the first time. Different from existing studies on U-shaped lines, we combine the advantages of two individual line configurations (namely parallel lines and U-shaped lines) and create an opportunity for assigning tasks to multi-line workstations located in between two adjacent U-shaped lines with the aim of maximising resource utilisation. Utilisation of crossover workstations, in which tasks from opposite areas of a same U-shaped line can be performed, is also one of the main advantages of the U-shaped lines. As in traditional U-shaped line configurations, the newly proposed line configuration also supports the utilisation of crossover workstations. An efficient heuristic algorithm is developed to find well-balanced solutions for the proposed line configurations. Test cases derived from existing studies and modified in accordance with the proposed system in this study are solved using the proposed heuristic algorithm. The comparison of results obtained when the lines are balanced independently and when the lines are balanced together (in parallel to each other) clearly indicates that the parallelisation of U-shaped lines helps decrease the need for workforce significantly.     

Dynamic modeling and redundant force optimization of a 2-DOF parallel kinematic machine with kinematic redundancy

High precision is still one of the challenges when parallel kinematic machines are applied to advanced equipment. In this paper, a novel planar 2-DOF parallel kinematic machine with kinematic redundancy is proposed and a method for redundant force optimization is presented to improve the precision of the machine. The inverse kinematics is derived, and the dynamic model is modeled with the Newton–Euler method. The deformations of the kinematic chains are calculated and their relationship with kinematic error of the machine is established. Then the size and direction of the redundant force acting on the platform are optimized to minimize the position error of the machine. The dynamic performance of the kinematically redundant machine is simulated and compared with its two corresponding counterparts, one is redundantly actuated and the other is non-redundant. The proposed kinematically redundant machine possesses the highest position precision during the motion process and is applied to develop a precision planar mobile platform as an application example. The method is general and suitable for the dynamic modeling and redundant force optimization of other redundant parallel kinematic machines.     

Parallel chaos optimization algorithm with migration and merging operation

Chaos optimization algorithm (COA) utilizes the chaotic maps to generate the pseudo-random sequences mapped as the decision variables for global optimization applications. A kind of parallel chaos optimization algorithm (PCOA) has been proposed in our former studies to improve COA. The salient feature of PCOA lies in its pseudo-parallel mechanism. However, all individuals in the PCOA search independently without utilizing the fitness and diversity information of the population. In view of the limitation of PCOA, a novel PCOA with migration and merging operation (denoted as MMO-PCOA) is proposed in this paper. Specifically, parallel individuals are randomly selected to be conducted migration and merging operation with the so far parallel solutions. Both migration and merging operation exchange information within population and produce new candidate individuals, which are different from those generated by stochastic chaotic sequences. Consequently, a good balance between exploration and exploitation can be achieved in the MMO-PCOA. The impacts of different one-dimensional maps and parallel numbers on the MMO-PCOA are also discussed. Benchmark functions and parameter identification problems are used to test the performance of the MMO-PCOA. Simulation results, compared with other optimization algorithms, show the superiority of the proposed MMO-PCOA algorithm.